Parts Technician (PAR)

Second Period Package - MATERIALS TECH (12 Modules) Comments

Date: 9/19/2022 12:05:07 PM
Module: 270201a
Version: 24
Page: 32
Comment: Under Types of Fuel, the definitions for Dual Fuel and Bi-Fuel appear to be switched. A Bi-fuel vehicle carries both fuels, but only runs on one at a time, and is switched either manually or automatically as needed, where a dual fuel vehicle carries 2 fuels and burns both simultaneously.
Status: Implemented

Date: 9/20/2023 11:16:43 AM
Module: 270201a
Version: 25
Page: 21
Comment: On Objective Two Exercise, question #2, it asks what four (4) other components can be driven by a camshaft. The answer is found on page 16, where there are 5 (five) possible answers. Please correct the question to reflect the number of answers listed in the module, and also correct the answer section on page 53.
Status: Approved for Review

Date: 1/20/2021 12:20:08 PM
Module: 270201m
Version: 21
Page: 23
Comment: The governor section of this module, pages 23 to 25 need to be rewritten or removed. Over time information has been removed from the module and now the information left does not make sense. Needs to be determine whether these types of governors are even used today.
Status: Update in Progress

Date: 1/20/2021 4:44:42 PM
Module: 270201m
Version: 21
Page: 17
Comment: Table 4, Consider removing the first 4 methods of metering. These are old systems and the description of what they are and how they operate has been removed from the module previously. This would include removing information related to these metering methods throughout the module.
Status: Update in Progress

Date: 9/23/2022 2:36:54 PM
Module: 270201p
Version: 24
Page: 45022
Comment: Consider rearranging the Catalyst Materials section on the top of page 4 to read "1. oxygen reduction, 2. oxidizing", along with rearranging the subheadings on pages 4-6 to match. In modern converters, since the reduction happens first followed by oxidizing, it makes more sense to teach this way to help with retention. The current formatting in the module leads to confusion as it is taught in reverse order.
Status: Implemented

Date: 9/26/2022 9:49:41 AM
Module: 270201q
Version: 24
Page: 8
Comment: Grammar error on second bullet at top of page. Currently reads "Vapour give off heat when changed...", should read "Vapour gives off heat when changed..."
Status: Implemented

Date: 9/26/2022 10:30:43 AM
Module: 270201q
Version: 24
Page: 37
Comment: Spelling error in last paragraph on page 37, on the first line. Currently reads "...against the evaporate outlet tube." Should be corrected to "...against the evaporator outlet tube."
Status: Implemented

Date: 9/26/2022 10:12:30 AM
Module: 270201q
Version: 24
Page: 24
Comment: Please add a period to complete the second sentence of the second paragraph on page 24. Currently printed as "... pressurizes the refrigerant As refrigerant flows..." Need a period between refrigerant and As
Status: Implemented

Date: 10/24/2022 10:41:44 AM
Module: 270202a
Version: 24
Page: 1
Comment: The introduction paragraph is incomplete. Please add the word "industry" to the end of the final sentence to complete it.
Status: Implemented

Date: 10/24/2022 11:12:08 AM
Module: 270202b
Version: 24
Page: 16
Comment: On the top line of text on page 16, please remove the number "3" from the listed set of numbers. It should not appear as an option when multiplying to find partial hunting gear sets, and the table below that paragraph also does not show 3 as an option.
Status: Implemented

Date: 10/24/2022 11:45:55 AM
Module: 270202d
Version: 24
Page: 2
Comment: On the first line of text at the top of the page, a space is missing between "helps you..."
Status: Implemented

Date: 1/31/2024 6:31:51 PM
Module: 270202h
Version: 24
Page: 45 & 52
Comment: How many questions should be on the objective four 9 or 5???
Status: Approved for Review

Date: 2/21/2024 2:28:58 PM
Module: 270202l
Version: 24
Page: 25
Comment: The text under Figure 17 mentions that the VFS replaces the manual shift valve. This would make more sense if corrected to state that it replaces the Throttle/Modulator control valve.
Status: Approved for Review

Date: 2/27/2023 11:49:23 AM
Module: 270204h
Version: 24
Page: 18
Comment: In order to answer question One of Objective Three Exercise Add to the last sentence of the first paragraph, "or field cultivator."
Status: Approved for Review

Date: 2/27/2023 11:52:04 AM
Module: 270204h
Version: 24
Page: 25
Comment: Under the heading Rod Weeder. Add to the end of the first sentence " or field cultivator."
Status: Approved for Review

Date: 2/27/2023 5:00:04 PM
Module: 270204h
Version: 24
Page: 47
Comment: under the heading Sprayer Safety. Second sentence, change rubber equipment to PPE
Status: Approved for Review

Date: 5/31/2023 11:20:12 AM
Module: 270403i
Version: 17, 54
Page:
Comment: Objective One Exercise Question 6 provides the incorrect image for a plug valve. A globe valve is pictured. Self test question 5 provides the incorrect image for a check valve. A plug valve is pictured. *Please note this comment has been moved from 4th period to 2nd period due to changes in Parts Tech/Materials Tech renaming conventions.
Status: Implemented


Archived Comments

Year: 2021

2/23/2021 3:38:38 PM
Module: 270204h
Version: 21
Page: 30
Comment: Under the heading Seeding Equipment Types #2 air seeders/drills, remove /drills
Status: Implemented

2/23/2021 3:35:29 PM
Module: 270204h
Version: 21
Page: 35
Comment: Table 4, Remove "marker discs" Obsolete since GPS
Status: Declined

2/6/2021 11:07:10 AM
Module: 270201q
Version: 21
Page:
Comment: Update the information on refrigerants and refrigerant oil. R12 was phased out in the 90s and discontinued Sept. 1, 2000. Focus on R134a and R1234yf.
Status: Declined

2/1/2021 6:20:53 PM
Module: 270201p
Version: 21
Page: 57
Comment: Self-Test Answers, Question 1 c) change N2 to N and O2 to O
Status: Declined

2/1/2021 6:18:53 PM
Module: 270201p
Version: 21
Page: 54
Comment: Self-Test Question 1 a) change N2 to N c) change N2 to N and O2 to O d) change N2 to N
Status: Declined

2/1/2021 6:15:30 PM
Module: 270201p
Version: 21
Page: 42
Comment: Under the heading Diesel EGR Systems, change O2 to O and N2 to N
Status: Declined

2/1/2021 6:10:36 PM
Module: 270201p
Version: 21
Page: 23
Comment: Table 3 Change N2 to N change O2 to O
Status: Declined

2/1/2021 6:08:28 PM
Module: 270201p
Version: 21
Page: 18
Comment: Under the heading Active Regeneration, #2 change O2 to O #4 change O2 to O
Status: Declined

2/1/2021 6:06:11 PM
Module: 270201p
Version: 21
Page: 18
Comment: Figure 28 change O2 to O (three times) Figure 29 change O2 to O (four times)
Status: Declined

2/1/2021 6:02:53 PM
Module: 270201p
Version: 21
Page: 17
Comment: Under the heading Passive Regeneration, #2 change O2 to O
Status: Declined

2/1/2021 5:59:51 PM
Module: 270201p
Version: 21
Page: 15
Comment: Figure 24 change to O2 to O (four times)
Status: Declined

2/1/2021 5:58:37 PM
Module: 270201p
Version: 21
Page: 15
Comment: Paragraph above Figure 24, change O2 to O
Status: Declined

2/1/2021 5:54:29 PM
Module: 270201p
Version: 21
Page: 5
Comment: Under the title Oxygen Reduction, first paragraph change O2 to O
Status: Declined

2/1/2021 5:52:23 PM
Module: 270201p
Version: 21
Page: 4
Comment: Table 2, in the column Add Oxygen change the O2 to O for clarity in the CO row say add one O atom (HC) H row say combine two H atoms with one O atom (HC) C row say add two O atoms
Status: Declined

2/1/2021 5:46:13 PM
Module: 270201p
Version: 21
Page: 4
Comment: Under the heading Oxidizing, first paragraph last sentence, add a period
Status: Implemented

2/1/2021 5:43:28 PM
Module: 270201p
Version: 21
Page: 3
Comment: In the paragraph titled Single Bed Two-Way Catalytic Converter, change N2 to N and O2 to O In the paragraph titled Single Bed Three-Way Catalytic Converter, change N2 to N and O2 to O In the paragraph titled Dual Bed Two-Way Catalytic Converter, change N2 to N and O2 to O
Status: Declined

2/1/2021 5:36:24 PM
Module: 270201o
Version: 21
Page: 43
Comment: In the definition of Three-way catalytic converter - change the N2 to N and O2 to O
Status: Declined

2/1/2021 5:33:40 PM
Module: 270201o
Version: 21
Page: 39
Comment: Question 9 b) change N2 to N and O2 to O
Status: Declined

2/1/2021 4:54:30 PM
Module: 270201o
Version: 21
Page: 4
Comment: Figure 1, change the O2 to O and the N2 to N
Status: Declined

2/1/2021 4:52:52 PM
Module: 270201o
Version: 21
Page: 3
Comment: Change the Oxygen symbol in paragraph one and three to O
Status: Declined

2/1/2021 4:46:18 PM
Module: 270201o
Version: 21
Page: 2
Comment: Table 1, Change the Nitrogen symbol to N not N2 Oxygen symbol to O not O2
Status: Declined

2/1/2021 4:33:59 PM
Module: 270201o
Version: 21
Page: 2
Comment: Table 1, Change the Nitrogen symbol to N not N2 Oxygen symbol to O not O2
Status: Declined

1/22/2021 11:42:08 AM
Module: 270201k
Version: 21
Page: 9
Comment: Objective Two Exercise Question 1, Extend line to fit the answer, resist detonation
Status: Implemented

1/21/2021 7:03:55 AM
Module: 270201m
Version: 21
Page: 17
Comment: Add to Table 4 - Methods of metering, High Pressure Common Rail
Status: Declined

1/20/2021 4:49:08 PM
Module: 270201m
Version: 21
Page: 44
Comment: If methods of metering is removed the section on Engine Shutdown has to be rewritten.
Status: Declined

1/20/2021 4:33:29 PM
Module: 270201h
Version: 21
Page: 27
Comment: Change the title 'Bypass (Partial-Flow) Lubricating System" to "Bypass (Partial-Flow) Filtration System"
Status: Implemented

1/20/2021 4:31:04 PM
Module: 270201h
Version: 21
Page: 26
Comment: Change the title 'Full-Flow Lubricating System" to "Full-Flow Filtration System"
Status: Implemented

1/20/2021 4:28:34 PM
Module: 270201h
Version: 21
Page: 34
Comment: Questions 4 and 5, change "pressurized lubrication" to "filtration"
Status: Implemented

1/20/2021 4:19:59 PM
Module: 270201i
Version: 21
Page: 20
Comment: Remove the paragraph below Figure 22 - A particulate trap. This information is covered in greater detail in the Emission Control modules,
Status: Declined

1/20/2021 4:09:49 PM
Module: 270201l
Version: 21
Page: 8
Comment: Add above figure 12 - Knock Sensor, The ECM/PCM retards the ignition timing until the knock is eliminated.
Status: Implemented

1/20/2021 12:14:39 PM
Module: 270201m
Version: 21
Page: 18
Comment: Figure 13, Add a label "Governor Housing" below item 8
Status: Implemented

1/20/2021 12:09:50 PM
Module: 270201m
Version: 21
Page: 19
Comment: Second paragraph, Second sentence. Replace the word "send" to "sent"
Status: Implemented

1/14/2021 11:08:28 AM
Module: 270201f
Version: 21
Page: 17
Comment: Figure 19, add labels pointing at the Cylinder Head and the Port
Status: Implemented

1/14/2021 11:02:50 AM
Module: 270201f
Version: 21
Page: 7
Comment: Figure 8, change the shaped area that represent the ports. The two circle with the letter I should be joined together as the intake port. The two circles with the letter E should be joined together to represent the exhaust port.
Status: Implemented

1/12/2021 4:22:01 PM
Module: 270201d
Version: 21
Page: 5
Comment: Add to first sentence below Figure 6. V6 engine "with 90 degree banks" must ...........
Status: Implemented

Year: 2020

2/24/2020 3:15:02 PM
Module: 270204i
Version: 21
Page: 29
Comment: In the sentence just above Figure 47, add the word "be" between should and replaced.
Status: Implemented

2/24/2020 3:09:50 PM
Module: 270204h
Version: 21
Page: 28
Comment: Under the heading Seeding Operation, first sentence, remove the second "to"
Status: Implemented

2/21/2020 10:29:54 AM
Module: 270204g
Version: 21
Page: 14
Comment: Inside the NOTE box, second sentence, remove the word "will"
Status: Implemented

2/21/2020 10:17:15 AM
Module: 270204g
Version: 21
Page: 35
Comment: Under the header Solvent, clean you this section, it mentions lacquer and thinner which ni longer used in the auto body industry.
Status: Declined

2/21/2020 10:14:44 AM
Module: 270204g
Version: 21
Page: 35
Comment: Under the heading Binder, Second sentence, remove nitrocellulose, alkyd
Status: Declined

2/21/2020 9:47:19 AM
Module: 270204g
Version: 21
Page: 33
Comment: Under the heading Automotive Paint, remove the history portion paragraphs 2, 3 and 4.
Status: Declined

2/18/2020 4:27:29 PM
Module: 270201p
Version: 21
Page: 43
Comment: Figure 66, Remove space from the label, EGR/ Charge Air Mixer
Status: Implemented

2/18/2020 4:25:38 PM
Module: 270201p
Version: 21
Page: 43
Comment: First paragraph, last sentence, change is to "was" and later to" earlier"
Status: Implemented

2/18/2020 4:22:14 PM
Module: 270201p
Version: 21
Page: 34
Comment: Objective One Exercise, question 6 Answer (a) is not stated in the module, on page 10 it says used on many newer vehicles.
Status: Implemented

2/18/2020 4:18:19 PM
Module: 270201p
Version: 21
Page: 32
Comment: Under the Heading Diesel Intake and Exhaust Systems and Emission Control Remove "Aside from the changes to accommodate EGR the were explaining earlier"
Status: Implemented

2/18/2020 4:13:46 PM
Module: 270201p
Version: 21
Page: 26
Comment: Just above figure 41 the abbreviation PWM is used. This maybe the first occurrence could we say '"Pulse Width Modulated" (PWM)
Status: Implemented

2/18/2020 4:09:09 PM
Module: 270201p
Version: 21
Page: 15
Comment: Figure 23 is missing its graphic
Status: Implemented

1/14/2020 1:34:40 PM
Module: 270201d
Version: 21
Page: 39
Comment: Due to self test questions missing on page 37, the answers are not in correct order. Also answers for questions 14, 15 and 16 are not shown
Status: Implemented

1/7/2020 3:19:43 PM
Module: 270201l
Version: 21
Page: 27
Comment: Objective Two Exercise Question 4, Add the words "of the air" between density -- in. to read: List the two (2) primary inputs that control speed and density of the air in a TBI system?
Status: Implemented

1/7/2020 3:16:00 PM
Module: 270201l
Version: 21
Page: 27
Comment: Objective Two Exercise Question 2 Add the words "fuel pressure" between the words normal --- operating. To read: What is the normal fuel pressure operating pressure of the throttle body injection system?
Status: Implemented

1/7/2020 12:19:35 PM
Module: 270203a
Version: 21
Page: 39
Comment: Figure 31 has been changed from barrel graphic. Students prefer the previous barrel graphic to the new structural tree graphic.
Status: Implemented

Year: 2019

11/20/2019 2:44:45 PM
Module: 270202h
Version: 21
Page: 7
Comment: Under Configurations heading. Delete third bullet. There is no explanation on the following pages about this bullet.
Status: Declined

11/20/2019 7:31:05 AM
Module: 270201h
Version: 21
Page: 42
Comment: Add the heading "Filter Storage" after Figure 45. add, Store filters in a clean. coll, dry environment. Filter media breaks down overtime so watch the date code on the filter and rotate the inventory using the first-in, First-out (FIFO) method.
Status: Implemented

11/20/2019 7:22:10 AM
Module: 270201h
Version: 21
Page: 12
Comment: Remove the section on Viscosity Index and Figure 10.
Status: Declined

11/20/2019 7:14:46 AM
Module: 270201h
Version: 21
Page: 2
Comment: Module is missing the NOTES column.
Status: Implemented

11/19/2019 7:12:17 AM
Module: 270201j
Version: 21
Page: 34
Comment: Sentence above Figure 31, remove the comma between the words "near and peak" to read "near peak torque speed."
Status: Implemented

11/19/2019 7:09:19 AM
Module: 270201j
Version: 21
Page: 32
Comment: Figure 31, Original picture was replaced with the wrong one. Reinsert original or get a proper replacement.
Status: Implemented

11/19/2019 7:04:14 AM
Module: 270201j
Version: 21
Page: 13
Comment: The description above Figure 10. Replace the words "mesh screen" with "bowl" and remove the word "of" Should now read, An example of a bowl type pre-cleaner is shown in Figure 10.
Status: Implemented

11/19/2019 6:59:34 AM
Module: 270201k
Version: 21
Page: 31
Comment: Objective Five Exercise, Question 3, Add two additional line to write in the answer.
Status: Implemented

11/5/2019 7:49:02 AM
Module: 270201e
Version: 21
Page: 36
Comment: Objective Two Exercise Answers, question 2, Add "d) hinged roller
Status: Implemented

11/5/2019 7:46:43 AM
Module: 270201e
Version: 21
Page: 22
Comment: Objective Two Exercise question 2. Change "three (3) to "four (4)"
Status: Implemented

11/4/2019 2:22:48 PM
Module: 270201e
Version: 21
Page: 17
Comment: Sentence above figure 24. Replace "solid" with the words "flat faced".
Status: Implemented

11/4/2019 2:18:47 PM
Module: 270201e
Version: 21
Page: 15
Comment: Under the heading Types. change the word "three" to "four".
Status: Implemented

11/4/2019 2:13:40 PM
Module: 270201d
Version: 21
Page: 37
Comment: Self-Test, question numbering. The number is out of sync. jumps from number 2 to number 6.
Status: Implemented

11/4/2019 2:11:27 PM
Module: 270201d
Version: 21
Page: 30
Comment: Objective Three Exercise, Question 2 change the word "five" to "four"
Status: Declined

11/4/2019 2:06:57 PM
Module: 270201c
Version: 21
Page: 41
Comment: Self-test Answers #15 Remove the answer "stronger ring lands" the module does not support or even mention this. Asnwer b) could be split up or change the wording in the question on page 40.
Status: Implemented

11/4/2019 2:02:20 PM
Module: 270201c
Version: 21
Page: 36
Comment: For question 2. please add two additional line to write out the answer.
Status: Implemented

11/4/2019 1:56:14 PM
Module: 270201b
Version: 21
Page: 31
Comment: Objective One Exercise Answers 1 a) add (wrist pin) behind piston pin as in figure 1 on page 2.
Status: Implemented

11/4/2019 1:52:50 PM
Module: 270201b
Version: 21
Page: 8
Comment: Figure 10 was replaced. Please add an insert (split) style bearing.
Status: Implemented

11/4/2019 1:46:01 PM
Module: 270201a
Version: 21
Page: 19
Comment: Figure 20. The Clearance Volume for the diesel engine needs to be reduced by 50%. Right now it is shown as the same as the Gas engine.
Status: Implemented

11/4/2019 1:38:08 PM
Module: 270201f
Version: 21
Page: 41
Comment: Add a heading to bottom of the page, "Storage" and the sentence. " Cylinder head gasket must be stored flat in their original packaging."
Status: Declined

11/4/2019 1:34:09 PM
Module: 270201f
Version: 21
Page: 23
Comment: In the NOTE box. add "with a painted stripe" between the words "coded" and "to"
Status: Declined

11/4/2019 1:30:45 PM
Module: 270201f
Version: 21
Page: 7
Comment: Under the heading Ports. first sentence, add the word exhaust between the words "and" and "out" to read "and exhaust out".
Status: Implemented

11/4/2019 1:27:09 PM
Module: 270201f
Version: 21
Page: 5
Comment: Figure 5 was replaced. Find a picture of a various types of cylinder heads. (One cylinder, Two cylinder and Six cylinder - Heavy duty application) or put the original picture back in.
Status: Implemented

1/1/2019 12:00:00 AM
Module: 270202f
Version: 4
Page: 32
Comment: Change questions 3 and 4 on page 32 to read CV joint rather than u-joint.
Status: Implemented

1/1/2019 12:00:00 AM
Module: 270201a
Version: 10
Page: 12
Comment: Arrow on figure 11 pointing to cylinder. Change cylinder to read cylinder liner.
Status: Implemented